SANTA IS COMING!
We can still get you a helmet by Christmas! Only a few spots left. Email for details! Thanks!
CAN I GET A WITNESS?!
I recently did a trade with a very cool cat named William from Witness Company USA. He makes killer rings (and other jewelry) in the tradition of Mexican biker rings. Big ass solid brass and silver rings made by hand in Brooklyn, NY.
WITCO offers a variety of designs and sizes to choose from. Just like our helmets, these are made by hand, one at a time so there is a wait time. And believe me, it's worth the wait. Can I get a witness!
SUPPORT AMERICAN MADE!
MILESTONE! June 2014
OSH has hit the 5 YEAR MARK! We would like to thank all 1,190 customers for buying our custom painted helmets.
20 helmets per month for 5 years straight is amazing! That's a hell of a lot of painting!
We would not be here without you. We started out small, with the idea that each and every helmet was going to someone who would truly appreciate the hand painted quality that OSH is known for worldwide. We still hold that same belief 5 years later.
THANKS FOR STOPPING BY!
Well, the weather is looking better and better in the parts of the country that suck during the winter months! Dust off those bikes and ride safe!
I have been chosen in the top 5 out of 35 painters to take the final spot in the Art & Fuel Paint Exhibit which will be held at Born Free 6. If you would like to vote for me click here: www.tinyurl.com/chopcult5
I would greatly appreciate your support!
Voting ends TODAY! 3/28!
**UPDATE: I did not win:(
HAPPY NEW YEAR!
2013 was another great year for OSH! I want to thank everyone who bought lids or had their tins painted. YOU make all of this possible. Have a safe and happy new year!
BILTWELL GRINGO is here!
Retro inspired design with modern quality! Biltwell inc has done it again! This killer helmet is DOT APPROVED and available in 5 COLORS and in sizes L, XL, XXL as of right now.
Sizes XS, S, M in about a month.
You can buy it in the webstore right now!!!!
Marcus from Germany enjoying his freshly painted and reupholstered vintage Bell Moto 3 from Old School Helmets and Hell Mutts (custom interior)
Introducing Biltwell's NEW 3/4 open face DOT helmet . . . The Bonanza!
In my opinion, this is the best looking/fitting DOT helmet on the market. Get one today!!!
Couple of very cool ART SHOWS I will have pieces in!
"Against The Grain 2" is an all skate deck art show in Venice, CA - 3/2
"Oil and Water" is a celebration of surf, chopper, rat rod and skate culture through art! Put on by Us Versus Them. San Diego, CA - 3/9
6 / 7 Pack
Just finished this 6 pack for Feenhead in Canada and a 7 pack for Tarek in Dubai UAE! Sell em out fellas!!
Bike is running well, business is booming and although I don't have much free time, I get to do what I love for a living! Life doesn't get much better!
THANKS to all of you for the continued support!!!
I finally finished up this project for Street Chopper Magazine's John Zamora. He is rehabbing a vintage Honda CB750 chopper and documenting it in the magazine! I am stoked to have been a part of this project. Thanks man!!
FULL FACE FEVER
We have been rehabbing a few vintage full face helmets lately! The Bell Moto 3, Moto 4, Simpson Moto, Bell Star, etc are getting VERY popular among the chopper freaks out there (myself included) and with popularity comes a price. Beat up originals go for $150-250 on ebay and other sites.
The good news is that we tear them down to the bare shell, removing all snaps, straps, etc. After bodywork and paint, I send them off to HELLMUTTS in the state of Washington for a custom interior, snaps, straps, etc.
The end product is a complete custom vintage full face helmet that oozes with style! Bitchin!
Check out our new "VINTAGE FULL FACE LIDS" page!
Its that time of year!
Freezing cold hands, runny noses, coughs & sniffles. Well, WE GOT YA COVERED! Or at least your head!
FREE Lowbrow Customs beanie with the purchase of a custom painted helmet! OFFER GOOD 1/7/13 - 2/7/13
It's the least we could do;)
Just finished up this set of tins for Brandon! Heavy silver flake base with gloss black and tangerine candy!
If you have nothing better to do on sunday, Dec. 9th you should come check out the David Mann Chopperfest in Ventura, Calif.
I will have a table set up in the Lowbrow Customs booth. Stop by and check out some of my work in person. I will have lids, tins, decks & t shirts!
Bring lots of cash (slowly rubbing hands together) lmao!
Dubai in the house!
I painted these tins for Nikhil in Dubai, UAE about a month ago. He finally received them and threw them on his Zero Engineering bike. Fantastic!
Knocked out 2 classy paint jobs over the past couple of weeks. Check out the "custom painted tins" page for a closer look.
The bike I just finished building/painting is featured on Chop Cult! Check it but don't wreck it!
NEW NOV COLORS!
The dudes over at Biltwell Inc. recently released another set of killer colors for their world famous Novelty lids!
Flat Black Out! Gloss Hazard Orange! Flat Olive Green! Gloss Vintage White! Flat Chocolate Brown!
Hip Hip ...... Hooray!
Check out the new BIKES page above for a look at some killer scoots I have had the opportunity to paint!
HAPPINESS is a warm gun!
A warm paint gun, that is! Been super busy lately and I appreciate everyone's patience! Here are a few jobs fresh off the gun. Check out the custom painted tins page for a closer look.
Black/red tins are headed to Nikhil in Dubai, cream and brandywine cafe set are going to Jeff here in the states and solid brandywine tank is staying right here with me to finish off a bike I have been building for way too long!
I painted this bike, built by Brian Triglia, a few months back. He built it for the Horse (magazine) Smokeout Amatuer Chopoff and although it didn't win, it got plenty of looks! KILLER SCOOT!
These tins and helmet are heading to Marius in Norway. The helmet is a vintage Bell Moto 3 full face circa 1979 and it will make a pit stop in Washington (state) at Hellmutts for some new hardware and a custom liner.
Tank, seat and cowl were handmade by Rene at Mercury Moto. This dude has some insane fabrication skills! Holla!
"El Fuerte" is here!
NEW from BILTWELL INC. "El Fuerte" is replacing "the Hustler" as Biltwell's new DOT approved open face helmet! Smaller overall shell and the same great quality.
Available in 8 colors from size XS to XXL. You can purchase plain (no artwork) helmets directly from our webstore.
For more pics/info, check out our "D.O.T. Info" page.
If you want some custom paint on yours, please contact us directly!
We have been in this little game, the custom helmet game, for a little over 3 years now. We just sold our #1000th helmet!!!!!!!!!
I really can't believe it and could not have done it without YOU, our customers. Whether you bought 1 helmet or 20 helmets, I appreciate you more than you know!
I could not have done this without the help of my friend Steve Havens. He has been helping since the beginning and has watched this whole mess grow into what it is today. Thanks Steve!
I also want to thank my wife Sarah and our kids Zoe (5) and Isaac (2) who are always supportive. The BILTWELL crew for putting out killer helmets (among other things) and LOWBROW CUSTOMS for the great customer service over the past few years.
Below is the helmet that started it all ... the first helmet I ever leafed! I saw an article in Street Chopper Magazine and figured if they could do it, I could do it! I am glad I came across that article;)
Here's to another 1000!
Long Beach Swap Meet
Went to the LB swap at the end of August and got to meet a customer in person which is a rare occurrence. Enjoy your new lid Bea!
Photo courtesy of Street Chopper Magazine! Lid courtesy of O.S.H.
DEVIL T's are BACK!
Finally got more of these printed! All of you who have been waiting . . . snag em up!
Printed on HIGH QUALITY vintage fit, extra soft heather gray T shirts. Printed in the USA!
Go to the WEBSTORE to buy one now! Thanks for your support!
BACK AT IT!
Here is the first full paint job out of my new shop in Calif. This was done for Roger who is rebuilding an already killer scoot! I couldn't be happier with the way this one turned out!
This is about as hard as it gets in my little world . . . gloss black, heavy metal flake panels and hand pinstriping! It may look simple but if you've ever shot paint, you know what I'm talking about!! Enjoy Roger!
oh, and check out my new shop truck in the last pic! 1960 Ford F100 . . . hell yeah!
We made it to California and are up and running again! I am stoked with my new shop space.
Old School Helmets is now located in Temecula, Calif. Stop by and say hi if you are in the area!
Heading to OH Canada tomorrow! Check out more pics on the "custom painted tins" page!
I had the chance to paint this wicked cool one piece race body. Hand crafted by some old dude long ago. I painted this for a local guy named David.
I was stoked when Tim told me his ideas for paint on this tin set. Deep black fading into rootbeer fading into tangerine. Add a little gold leaf and VIOLA! Instant classic! Can't wait to see these on his XS650 chop!
Painted these up for Greg out in Utah. These are going on a killer XS650 chop he built. I will post up some pics as soon as the bike is finished!
NEW T SHIRTS!
Available in the WEB STORE for $25 Grab one now! Limited Quantities!
I painted this tank for Bryan who is a contestant in the 2012 Horse Smoke Out Amatuer Chop Off (ACO). Check out his bike in person June 22nd in Rockingham, NC. Thanks for letting me paint it man and GOOD LUCK!
Check out larger pics on the "Custom Painted Tins" page.
The Hermit Emerges!
A rare pic of me holding some of my work. Painted these tins for a local dude named Trenton. I will be posting better pics soon!
I just finished this tank for Brian. Enjoy man!!!
WEB STORE is open!!! Check it out!!!